Products
Mineral Wool
Rock Wool:
Features:
Low thermal conductivity products.
Service temperature up to 750° C.
Excellent chemical, thermal and dimensional stable.
Excellent tensile strength
None combustible products
Flexible and easy to cut, handle and install.
Typical Application:
Façade, partitions, cavity walls, sandwich panels.
Storage tanks, poultry farms and metal roofing.
Domestic cold and hot pipes and steam pipes.
Oil & gas industry, petrochemical and power plants.
Furnace, boilers, chimneys and ovens.
Studios, cinemas, theatres and lecture rooms.
Glass Wool:
Features:Low thermal conductivity products.
Service temperature up to 400° C.
Excellent chemical, thermal and dimensional stable.
None combustible products
Flexible and easy to cut, handle and install.
Typical Application:
HVAC ducting systems and chilled pipes.
Metal & steel buildings.
Partitions, false ceiling and cavity walls.
OEM such as ovens, water heaters and solar cells.
Studios, cinemas, theatres and lecture rooms.
Ceramic Fiber
Ceramic Fiber:
Features:
Service temperature up to 1250⁰ C.
Low thermal conductivity.
Low shrinkage and heat storage.
Excellent chemical and thermal stability.
Excellent tensile strength.
Resilience and resistance to thermal shock.
Flexible and easy to cut or install.
Without organic binder and Asbestos free.
Typical Application:
Wall lining and back lining of industrial furnaces.
Boiler insulations.
Glass furnace crown insulation.
Furnace door seals.
Duct linings and Pipe insulations.
Insulation of the shell of precision casting.
Insulation of the roller of heating furnaces.
Insulation of petrochemical heating furnaces.
Cellular Glass
Description:
Cellular glass insulation is a lightweight, rigid insulating material composed of millions of completely sealed glass cells, each an insulating space. This all glass, closed cell structure provides an unmatched combination of physical properties ideal for piping and equipment above ground as well as below ground, indoors and outdoors, at operating temperatures from (-268°C up to 482°C).
Features :
• 100-Percent Glass/No Binder or Fillers.
• Low thermal conductivity.
• Flame Spread 0/Smoke Developed 0.
• High Compressive Strength.
• Wide Temperature Service Range.
• Dimensionally Stable.
• Non-Combustible.
Typical application:
• Stainless Steel Hot Water Lines.
• Hot Oil Piping and Equipment.
• LNG Piping.
• Green Roof Insulation.
• Underground Steam Distribution.
• Cold Process Pipes and Equipment.
• LNG Tank Bases.
• Fireproof Building Panels
Calcium silicate
Description:
Calcium silicate insulation made from tobermolite crystal reinforced with non-asbestos fibers. It is a rigid material exhibiting. It has many diverse applications in process industries where rigid high temperature insulation is needed with service up to 1000° C.
Features :
High compressive strength.
Low shrinkage values and low thermal conductivity.
High heat resistance at high temperature.
Non-toxic and chemically Stable.
Typical application:
Used for both process plant and equipment.
Boilers and steam pipe works.
Turbines and high temperature applications.
Elastomeric Closed Cell Rubber
Description:
Rubber foam is a flexible and lightweight elastomeric material designed primarily for thermal insulation. It's available either in tubing or sheet form. The extruded flexible tubing is designed to fit the standard diameters of steel & copper pipes, Sheets are available in pre-cut size, or in rolls
Features :
Have very low water vapor permeability.
Environmental friendly.
Corrosion resistant and Fire resistant.
Stable thermal conductivity (K. Value) during service.
Typical application:
An ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
-6f33d70f-1200w.png)
Polyurethane Foam & Phenolic Foam
Description:
Polyurethane foam is produced by a chemical reaction when two liquid components are combined at the tip of a gun. When the two parts are combined in the spray nozzle, they start a chemical reaction that creates the foam.
Phenolic foams are constructed of Phenolic resin, fire retardant, flame retardant, foaming and curing agents, It can be formed into a block which then can be cut into specific pipe insulation sections, pipe support, and insulation panels.
Features :
Low thermal conductivity.
Excellent cold insulation materials.
Water and wind proofing.
In site polyurethane injection.
Light weight and easy for handling
Typical application:
Cold industrial applications.
Cold tanks and pipes.
Roofing insulation.
Cryogenic boxes and tanks.
Automotive industry.
Fixation accessories & Cladding
Description:
We offer a wide range of insulation materials fixation accessories and metal cladding as the following:
Plain, 2 way and 3 way FSK tape. Closed cell rubber tape, vinyl tape, Scotch tape, fiber glass mesh tape, Wire mesh and supporting rings, stitching wire, Toggle clips, hooks and anchors, rivets and bolts, Self-tapping screws, Self-drilling screws, Stuck up pins, Duct sealant, Silicone, mechanical fixation pins, HVAC system accessories.
Galvanized sheets & rolls. Aluminum sheets & rolls. Stainless steel sheets & rolls, removable flanges and valves jacketing, pre coated galvanized sheets and roofing colored corrugated sheets.
EF Acoustic Insulation Panels
Applications:
- Residential homes and villas.
- Cinema, Theatre and Studios.
- Restaurants and big halls.
- Meeting rooms and educational rooms.
Advantages:
- Noise and acoustic reduction up to 95%.
- Hot, Cold and moisture insulation.
- Decorative stylish colors.
- Easy to wash, install and reinstall.
EF Insulation Jackets
The proper solution for money and energy-saving solutions that conserve energy, saving money and installation time comparing with traditional valve box insulation.
EF Insulation Jackets are commonly used to cover flanges, valves, expansion joints, heat exchangers, pumps, turbines, tanks and other irregular surfaces that carry steam, solvents, chemicals and corrosive agents, temperature applications ranging from -120ºF (-84ºC) to 800ºF (427ºC).
Benefits
• Removable and Reusable.
• Personnel Protection.
• Easily removed for valves periodic inspections or maintenance or replacement.
• Reduces and save Energy Consumption.
• Improves Equipment Efficiency and Longevity.
• Reduces Heat Loss and Unnecessary Emissions.
Thermo Fiber
Trading & Contracting Co.